TEC Accessories RETREEV Compact Retrieval Tool (Grappling) Red/Black Finish
TEC Accessories version of the conventional grappling hook. However, the TEC version is convenient to carry due to its compact size and light weight.
Why would you carry the RETREEV?
- Trees: Retrieve an item by hooking a branch and shaking
- Rooftops: Pull off those kid's toys, fallen branches, etc.
- Items fallen over a cliff or ledge: Don't risk your safety, pull them back up!
- Disasters: Use it to pull up or lower gear and supplies from higher elevations
- Camping: Throw it over a branch, hook a flashlight to it, and you have a nice area flood light or night light
- General: Lose an item over a fence? Don't climb the fence, RETREEV it!
And if that's not enough, you could simply suspend it from your ceiling and hang your gear from it!
So what makes the RETREEV so different from an ordinary grappling hook?
- The "spikes" are conveniently stored inside the body until you're ready to use it
- Comes with both aluminum and stainless steel spikes
- Stainless steel spikes will not bend or deform under normal use
- Aluminum spikes will allow the product to be retrieved by purposely bending the spikes under load. For example, when pulling it out of a tree branch
- Replacement spikes are available for a nominal cost, extending the life of the product
- A rare-earth magnet is mounted in the head, and can be used to retrieve metallic objects such as keys
- The unit is weighted towards the head, tipping the tail up when stationary. This allows you to drag the unit across a surface and snag the desired object easier
- A special "soft-mount" design has been incorporated to hold the spikes in place. This allows for a slight amount of spike movement to reduce the risk of getting the unit wedged in a tree branch for example
- This is truly a pocket sized device, slip it in your gear bag and you'll never know it's there until you need it
CAUTION: This product will not support your body weight and should not be used for climbing or load bearing activities. In addition, great care should be observed when pulling on the unit when aluminum spikes are installed. The unit could suddenly dislodge from its position and cause severe bodily injury.
The RETREEV main body and cap are made from aircraft grade 6061-T6 aluminum with a clear anodized finish, and includes 1 set of aluminum spikes and 1 set of stainless steel spikes.
- Overall length: 2.90" [73.5 mm]
- Head diameter: 0.63" [16 mm]
- Main body diameter: 0.51" [13 mm]
- Hole size: 0.177" [4.5 mm]
- Diameter around spikes when installed: Approximately 2" [50.8 mm]
- Weight (with stainless steel spikes): Under 1 oz [27 grams]
The RETREEV comes packaged in a clear protective tube with stainless steel spikes stored inside the body. A separate vial of aluminum spikes is included in the tube.
Accessories available for the RETREEV
Paracord, Micro and Nano Cord is available here for tethering to the RETREEV
Replacement Aluminium Spike Kit is available here
Replacement Stainless Steel Spike Kit is available here